Welcome to the Briggs Small Engine Parts WordPress Site!

We are so happy that you have decided to visit us here and please feel free to contact us at Bahrns Equipment  Phone: 1-800-432-2909 Email: lawneq@bahrns.com if you have any questions regarding Briggs or just to say hello!

We are currently off and running with tons of great Briggs Parts specific information with plenty more to post so come back often! The site is geared towards providing you with only the most relevant and up to date as well as valuable information regarding any part your Briggs Engine may require.

Have a Great day and We Look Forward to Informing You Each and Every day About Briggs Small Engine Parts!

6 thoughts on “About

  • David Buckley says:

    How do you repair the easy start starter when the pull cord is pulled all the way out (i.e. no recoil)?

  • EqExpert1 says:

    Howdy there!

    Thank you for your question and I have forwarded this to my Service Department!

    Sincerely,

    RLS

  • admin says:

    Hello, our parts department would like to know a bit more about exactly which one you have. Is it an easy start or a i-start. The easy starts are built a little different. Also it depends which part it broken. If you can give us a bit more information on this by responding to this comment or calling 1-800-342-2909, LawnEq.com Division of Bahrns Eq. . We would like to help you the best we can. Thanks for visiting the Briggs Small Engine Parts Blog.

  • admin says:

    It all depends what is wrong. Either something is stuck from build up, or the spring is broken. Probably need to replace the recoil spring. Also take a look soon at the LawnEq YouTube channel, http://www.youtube.com/user/lawneq, as there are some helpful videos posted on this channel soon.

  • Norman Swinney says:

    I just purchased a Craftsman Edger from Sears this week and the Briggs and Stratton 550 Series 140 cc engine runs rough and sputters. I am using regular gasoline with up to 10% ethanol. I added the Briggs & Stratton advanced formula fuel treatment and stabilizer.
    Should I return the edger to Sears?

  • admin says:

    Several things can cause this, but most of the time it is in the fuel system. Since the product was recently purchased, I would take it back to Sears, or to the nearest Briggs & Stratton Dealer ASAP. This will help eliminate them saying it was bad fuel.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>